Description
Rigel Engineering’s XC9000 is a high-performance XMC buffer memory card that supports one or two x4 Serial RapidIO (sRIO) interfaces or one x4 PCI Express. Each interface is dedicated to a 8 or 16 GB bank of high-speed DDR3L memory with ECC. The card can also be configured as a single sRIO or PCIe interface with 8 or 16 GB of memory. The XC9000 conforms to Vita 42.0, 42.2 and IEEE 1386 (CMC) standards.
- Up to 32 GB (2x banks of 16 GB) 400 MHz DDR3L-800
- Each bank is 72-bits wide, 64-bit data and ECC
- 6.4 GB/s DDR3L burst rate
- Up to two x4 Serial RapidIO lanes on XMC J15
- sRIO 3.125 GHz speed
- OR Configured as a single x4 PCI Express 2.0 VITA 42.3 on J15
- PCIe Generation 2, 5 GHz speed
- Vita 42.0, 42.2 and IEEE 1386 Compliant
- Sustained read/write throughput > 6 Gb/s per sRIO interface
- Commercial and Extended operating temperatures available
- Air-Cooled and Rugged, Conduction-Cooled versions available
- Rigel’s Standard Warranty
TECHNICAL SPECS
sRIO Host Interface
- Single or Dual x4 Serial Rapid IO interface
- 3.125GHz sRIO speed
- 6Gbps sustained data rate per interface (read and write)
- Memory mapped or DMA transfers
- Conforms to Vita 42.2 standard
sRIO Host Interface
- Standard XMC single-slot form factor (Vita 42.0)
- 2.5 oz / 71 grams (conduction-cooled, no heat sink)
- Maximum/typical power : 10W/8W
- XMC VPWR (+5V) Maximum/typical power : 2.0A/1.6A
- XMC VPWR (+12V) Maximum/typical power : 0.83A/0.66A
(VPWR may range from +5V to +12V depending on the host card)
- Temperature:
– Operating (standard) : 0°C to +70°C
– Operating (extended) : -40°C to +85°C
– Storage : -55°C to +125°C
- Relative Humidity:
– Operating: 5% to 95%, non-condensing
– Storage: 5% to 95%, non-condensing
Miscellaneous
- All power good LED
- Fail LED
- LEDs for sRIO interface status
Memory
- Configured for 16GB or 32GB DDR3L
- 16GB per bank/sRIO interface
- 400MHz DDR3L-800
- Supports ECC
- 2 Kbit Serial I2C EEPROM for product data
